Sandbox FN04.032.Х
A children's playground complex (sandpit) must be a modular, collapsible structure that provides comfortable conditions for children to play outdoors, and must consist of
6 side walls, 6 seats and frame.
The frame should be made of bent sheet with a thickness of at least 3 mm and stiffening ribs made of profile pipe with a cross-section of at least 50x25 mm.
Each post must end at the top with a landing place made of HDPE triple-layer plastic with a thickness of at least 15 mm.
The side walls must be made of HDPE triple-layer plastic with a thickness of at least 15 mm.
6 side walls, 6 seats and frame.
The frame should be made of bent sheet with a thickness of at least 3 mm and stiffening ribs made of profile pipe with a cross-section of at least 50x25 mm.
Each post must end at the top with a landing place made of HDPE triple-layer plastic with a thickness of at least 15 mm.
The side walls must be made of HDPE triple-layer plastic with a thickness of at least 15 mm.
Area, m2
33,5
Length x Width x Height, mm
3490х3030х300
Drop height, m
0,3
All fasteners, brackets, turnbuckles, eyebolts and chains are made of stainless steel.
The corners and edges of any user-accessible part of the equipment are rounded with a radius of at least 3 mm.
Plastic plugs are installed on the ends of supporting posts, on the places of necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
Weld seams must be smooth and eliminate the possibility of injury to users on contact.
Wood materials are free of surface imperfections.
Spaces and joints between equipment elements prevent users' body parts and clothing from getting stuck.
The design allows for adult access in circumstances requiring unaided assistance to the user.
In order to improve product quality and safety, changes (image, dimensions, etc.) may be made to the product documentation.
Materials:
Wooden timber consists of planed lamellas glued together in thickness using a smooth fugue. The lamellas may be spliced lengthwise. When splicing the lamellas along the length, the distance between the joints must be at least 300 mm. The glue used for gluing the lamellas by thickness to the smooth fugue is glue of the high water resistance group of the D4 class DIN EN 204. The glued laminated timber is made of wood of "resistant" or "medium resistant" classes and is subjected to special treatment. The ribs of the glued laminated timber are rounded on 4 sides with a radius of at least 3 mm.
Metal profile pipes are made of carbon and alloy steels. Alloying additives increase the strength and corrosion resistance of steel and reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes should not exceed twice the wall thickness.
Low Pressure Polyethylene (HDPE) is made of multilayer, non-toxic, deep-coloured polyethylene and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material.
The corners and edges of any user-accessible part of the equipment are rounded with a radius of at least 3 mm.
Plastic plugs are installed on the ends of supporting posts, on the places of necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
Weld seams must be smooth and eliminate the possibility of injury to users on contact.
Wood materials are free of surface imperfections.
Spaces and joints between equipment elements prevent users' body parts and clothing from getting stuck.
The design allows for adult access in circumstances requiring unaided assistance to the user.
In order to improve product quality and safety, changes (image, dimensions, etc.) may be made to the product documentation.
Materials:
Wooden timber consists of planed lamellas glued together in thickness using a smooth fugue. The lamellas may be spliced lengthwise. When splicing the lamellas along the length, the distance between the joints must be at least 300 mm. The glue used for gluing the lamellas by thickness to the smooth fugue is glue of the high water resistance group of the D4 class DIN EN 204. The glued laminated timber is made of wood of "resistant" or "medium resistant" classes and is subjected to special treatment. The ribs of the glued laminated timber are rounded on 4 sides with a radius of at least 3 mm.
Metal profile pipes are made of carbon and alloy steels. Alloying additives increase the strength and corrosion resistance of steel and reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes should not exceed twice the wall thickness.
Low Pressure Polyethylene (HDPE) is made of multilayer, non-toxic, deep-coloured polyethylene and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material.
Other products from the series Sandboxes