Play complex BC01.012.W
The children's playground complex is a modular collapsible structure that provides comfortable conditions for children to play outdoors and consists of 4 towers with roofs connected by a suspension bridge and two rope bridges. Tower 1, with a platform height of at least 900 mm, has a bent ladder with a rung, a vertical pole and a slide with a rung. To tower 2, with a platform height of at least 1200 mm, the following are attached: a fence, a climbing wall with holes and hooks for hands and feet, a crossbar with a rope, and a game panel "counters" is installed under the platform. Two fences are attached to tower 3, with a platform height of at least 1200 mm. A vertical pole, a fence, a slide with a bar are attached to tower 4, with a platform height of at least 1500 mm.
Bearing poles of the complex are made of glued deciduous timber with a cross-section of at least 78x78 mm. The top of the open post is finished with a plastic plug.
The floor frame of the towers is made of metal profile pipe with a cross section of at least 20x20 mm and bent metal sheet with a thickness of at least 3 mm.
The floor of the towers is made of wear-resistant non-slip plywood at least 15 mm thick.
The fencing of the towers is made of three-layer HDPE plastic with a thickness of at least 15 mm.
The roofs of the towers consist of 2 pitches with wave-shaped edges made of HDPE triple-layer plastic with a thickness of at least 15 mm.
The slide consists of a slope, boards, a safety section and a safety bar. The slide has a starting section with a height of at least 900 mm and 1500 mm, a sliding section and an ending section.
The gable is made of a single sheet of stainless steel at least 1.5 mm thick.
The sides of the slide are made of three-layer HDPE plastic with a thickness of at least 15 mm and a height of at least 100 mm.
The protective section of the slide is made of three-layer HDPE plastic with a thickness of at least 15 mm.
The safety bar is made of a stainless metal pipe with a diameter of at least 27 mm, encouraging the child to sit down and is installed at a height of at least 600 mm from the surface level of the starting section of the slide.
A set of counters consists of 3 metal crossbars with a diameter of at least 27 mm and counters made of three-layer HDPE plastic with a thickness of at least 15 mm.
The rope bridge consists of reinforced rope cables with a diameter of at least 16 mm connected to the railing. The railing is made of metal pipe with a diameter of at least 27 mm.
The suspension bridge shall consist of a bridge and reinforced rope cables with a diameter of at least 16 mm connected to the railing. The railing shall be made of metal pipe with a diameter of at least 27 mm. The bridge shall be made of wear-resistant non-slip plywood at least 15 mm thick.
The vertical pole is made of stainless metal pipe with a diameter of at least 27 mm.
The inclined wall of the climbing wall is made of wear-resistant, non-slip plywood at least 15 mm thick. Hooks for hands and feet are made of composite material. Above the wall there is a stainless metal bar with a diameter of at least 27 mm with a reinforced rope cable with a diameter of at least 16 mm.
The bent ladder is a stable construction and consists of two arc-shaped posts made of stainless metal pipe with a diameter of at least 27 mm and rungs with a diameter of at least 27 mm.
Bearing poles of the complex are made of glued deciduous timber with a cross-section of at least 78x78 mm. The top of the open post is finished with a plastic plug.
The floor frame of the towers is made of metal profile pipe with a cross section of at least 20x20 mm and bent metal sheet with a thickness of at least 3 mm.
The floor of the towers is made of wear-resistant non-slip plywood at least 15 mm thick.
The fencing of the towers is made of three-layer HDPE plastic with a thickness of at least 15 mm.
The roofs of the towers consist of 2 pitches with wave-shaped edges made of HDPE triple-layer plastic with a thickness of at least 15 mm.
The slide consists of a slope, boards, a safety section and a safety bar. The slide has a starting section with a height of at least 900 mm and 1500 mm, a sliding section and an ending section.
The gable is made of a single sheet of stainless steel at least 1.5 mm thick.
The sides of the slide are made of three-layer HDPE plastic with a thickness of at least 15 mm and a height of at least 100 mm.
The protective section of the slide is made of three-layer HDPE plastic with a thickness of at least 15 mm.
The safety bar is made of a stainless metal pipe with a diameter of at least 27 mm, encouraging the child to sit down and is installed at a height of at least 600 mm from the surface level of the starting section of the slide.
A set of counters consists of 3 metal crossbars with a diameter of at least 27 mm and counters made of three-layer HDPE plastic with a thickness of at least 15 mm.
The rope bridge consists of reinforced rope cables with a diameter of at least 16 mm connected to the railing. The railing is made of metal pipe with a diameter of at least 27 mm.
The suspension bridge shall consist of a bridge and reinforced rope cables with a diameter of at least 16 mm connected to the railing. The railing shall be made of metal pipe with a diameter of at least 27 mm. The bridge shall be made of wear-resistant non-slip plywood at least 15 mm thick.
The vertical pole is made of stainless metal pipe with a diameter of at least 27 mm.
The inclined wall of the climbing wall is made of wear-resistant, non-slip plywood at least 15 mm thick. Hooks for hands and feet are made of composite material. Above the wall there is a stainless metal bar with a diameter of at least 27 mm with a reinforced rope cable with a diameter of at least 16 mm.
The bent ladder is a stable construction and consists of two arc-shaped posts made of stainless metal pipe with a diameter of at least 27 mm and rungs with a diameter of at least 27 mm.
Age group, years
7-14
Length x Width x Height, mm
6110х5200х3600
Drop height, mm
1900
All fasteners, brackets, turnbuckles, eyebolts and chains are made of stainless steel.
The corners and edges of any user-accessible part of the equipment are rounded to a radius of at least 3 mm.
Plastic plugs are installed on the ends of the supporting posts, on the places of the necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
The welds are smooth and eliminate the possibility of injury to users on contact.
Wood materials are free of surface imperfections.
Spaces and joints between equipment elements prevent users' body parts and clothing from getting stuck.
The design allows for adult access in circumstances requiring unaided assistance to the user.
In order to improve product quality and safety, changes (image, dimensions, etc.) may be made to the product documentation.
Materials:
Wooden timber consists of planed lamellas glued together in thickness using a smooth fugue. The lamellas may be spliced lengthwise. When splicing lamellas along the length, the joints must be at least 300 mm apart. The glue used for gluing the lamellas by thickness to the smooth fugue is glue of the high water resistance group of the D4 class DIN EN 204. The glued laminated timber is made of wood of "resistant" or "medium resistant" classes and is subjected to special treatment. The ribs of the glued laminated timber are rounded on 4 sides with a radius of at least 3 mm.
Metal profile pipes are made of carbon and alloy steels. Alloying additives increase the strength, corrosion resistance of steel, reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes does not exceed twice the wall thickness.
Laminated plywood is made of birch flaked veneer, which is the thinnest sheets of wood. The veneer sheets are impregnated with formaldehyde resin glue and then glued together in special chambers where the material is pressed under the influence of high temperatures and pressure. The resins penetrate into the structure of the wood and the result is a strong, water-resistant, temperature-resistant plywood sheet.
Low Pressure Polyethylene (HDPE) is made of multilayer, non-toxic, deep-coloured polyethylene and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material.
The corners and edges of any user-accessible part of the equipment are rounded to a radius of at least 3 mm.
Plastic plugs are installed on the ends of the supporting posts, on the places of the necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
The welds are smooth and eliminate the possibility of injury to users on contact.
Wood materials are free of surface imperfections.
Spaces and joints between equipment elements prevent users' body parts and clothing from getting stuck.
The design allows for adult access in circumstances requiring unaided assistance to the user.
In order to improve product quality and safety, changes (image, dimensions, etc.) may be made to the product documentation.
Materials:
Wooden timber consists of planed lamellas glued together in thickness using a smooth fugue. The lamellas may be spliced lengthwise. When splicing lamellas along the length, the joints must be at least 300 mm apart. The glue used for gluing the lamellas by thickness to the smooth fugue is glue of the high water resistance group of the D4 class DIN EN 204. The glued laminated timber is made of wood of "resistant" or "medium resistant" classes and is subjected to special treatment. The ribs of the glued laminated timber are rounded on 4 sides with a radius of at least 3 mm.
Metal profile pipes are made of carbon and alloy steels. Alloying additives increase the strength, corrosion resistance of steel, reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes does not exceed twice the wall thickness.
Laminated plywood is made of birch flaked veneer, which is the thinnest sheets of wood. The veneer sheets are impregnated with formaldehyde resin glue and then glued together in special chambers where the material is pressed under the influence of high temperatures and pressure. The resins penetrate into the structure of the wood and the result is a strong, water-resistant, temperature-resistant plywood sheet.
Low Pressure Polyethylene (HDPE) is made of multilayer, non-toxic, deep-coloured polyethylene and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material.
Other products from the series Play complexes