Spring FN03.130.Х
The spring rocking chair shall be stylised as a flower and shall be a stable structure for the safe movement of children and shall consist of two bases, two supports and a seat.
The base must contain a base plate with special fixings. The design must be mirrored in the upper part of the spring with the base plate additionally equipped with special fixings.
The support shall be made of two springs with a bar diameter of at least 18 mm. The spring design must have high impact and vibration resistance.
The flower-shaped seat must be made of three-layer HDPE plastic with a thickness of at least 15 mm and have hand holes.
The base must contain a base plate with special fixings. The design must be mirrored in the upper part of the spring with the base plate additionally equipped with special fixings.
The support shall be made of two springs with a bar diameter of at least 18 mm. The spring design must have high impact and vibration resistance.
The flower-shaped seat must be made of three-layer HDPE plastic with a thickness of at least 15 mm and have hand holes.
Area, m2
13
Length x Width x Height, mm
1200х1200х450
Drop height, m
0,64
All fasteners, brackets, turnbuckles, eyebolts and chains are made of stainless steel.
The corners and edges of any user-accessible part of the equipment are rounded with a radius of at least 3 mm.
Plastic plugs are installed on the ends of supporting posts, on the places of necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
Weld seams must be smooth and eliminate the possibility of injury to users on contact.
Wood materials are free of surface imperfections.
Spaces and joints between equipment elements prevent users' body parts and clothing from getting stuck.
The design allows for adult access in circumstances requiring unaided assistance to the user.
In order to improve product quality and safety, changes (image, dimensions, etc.) may be made to the product documentation.
Materials:
Wooden timber consists of planed lamellas glued together in thickness using a smooth fugue. The lamellas may be spliced lengthwise. When splicing the lamellas along the length, the distance between the joints must be at least 300 mm. The glue used for gluing the lamellas by thickness to the smooth fugue is glue of the high water resistance group of the D4 class DIN EN 204. The glued laminated timber is made of wood of "resistant" or "medium resistant" classes and is subjected to special treatment. The ribs of the glued laminated timber are rounded on 4 sides with a radius of at least 3 mm.
Metal profile pipes are made of carbon and alloy steels. Alloying additives increase the strength and corrosion resistance of steel and reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes should not exceed twice the wall thickness.
Low Pressure Polyethylene (HDPE) is made of multilayer, non-toxic, deep-coloured polyethylene and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material.
The corners and edges of any user-accessible part of the equipment are rounded with a radius of at least 3 mm.
Plastic plugs are installed on the ends of supporting posts, on the places of necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
Weld seams must be smooth and eliminate the possibility of injury to users on contact.
Wood materials are free of surface imperfections.
Spaces and joints between equipment elements prevent users' body parts and clothing from getting stuck.
The design allows for adult access in circumstances requiring unaided assistance to the user.
In order to improve product quality and safety, changes (image, dimensions, etc.) may be made to the product documentation.
Materials:
Wooden timber consists of planed lamellas glued together in thickness using a smooth fugue. The lamellas may be spliced lengthwise. When splicing the lamellas along the length, the distance between the joints must be at least 300 mm. The glue used for gluing the lamellas by thickness to the smooth fugue is glue of the high water resistance group of the D4 class DIN EN 204. The glued laminated timber is made of wood of "resistant" or "medium resistant" classes and is subjected to special treatment. The ribs of the glued laminated timber are rounded on 4 sides with a radius of at least 3 mm.
Metal profile pipes are made of carbon and alloy steels. Alloying additives increase the strength and corrosion resistance of steel and reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes should not exceed twice the wall thickness.
Low Pressure Polyethylene (HDPE) is made of multilayer, non-toxic, deep-coloured polyethylene and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material.
Other products from the series Springs