Swing FN02.138.S

The two-section swing shall be a stable structure providing safe movement of the seat on the suspension and shall consist of side supports consisting of six metal posts, two crossbars, a cradle seat and a "nest" seat.
The side posts must be made of metal profile pipe with a cross-section of at least 80x80 mm. The top of the open post must end with a plastic plug.
The crossbar must be made of a metal pipe with a square cross-section of at least 60x60 mm. Fixing of the hanger must ensure horizontal position relative to the platform plane in the resting state and exclude the possibility of chain breakage in the place of suspension.
The flexible suspension shall be made of stainless steel chain manufactured by electric contact welding. The chain surface shall be free of cracks, sieve-like porosity, foaming and delamination.
The seat "nest" must be made of a round bent profile with a circular cross-section of at least 25 mm and a stretched rope reinforced cable with a diameter of at least 16 mm.
The flat seat should be made of plastic.
Длина х Ширина х Высота, мм
5100х2000х2300
Высота падения, мм
440
Возрастная группа, лет
1-12
All fasteners, brackets, turnbuckles, eyebolts and chains are made of stainless steel.
The corners and edges of any user-accessible part of the equipment are rounded to a radius of at least 3 mm.
Plastic plugs are installed on the ends of the supporting posts, on the places of the necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
Weld seams must be smooth and eliminate the possibility of injury to users on contact.
Wood materials are free of surface imperfections.
Spaces and joints between equipment elements prevent users' body parts and clothing from getting stuck.
The design allows for adult access in circumstances requiring unaided assistance to the user.
In order to improve product quality and safety, changes (image, dimensions, etc.) may be made to the product documentation.
Materials:
Wooden timber consists of planed lamellas glued together in thickness using a smooth fugue. The lamellas may be spliced lengthwise. When splicing lamellas along the length, the joints must be at least 300 mm apart. The glue used for gluing the lamellas by thickness to the smooth fugue is glue of the high water resistance group of the D4 class DIN EN 204. The glued laminated timber is made of wood of "resistant" or "medium resistant" classes and is subjected to special treatment. The ribs of the glued laminated timber are rounded on 4 sides with a radius of at least 3 mm.
Metal profile pipes are made of carbon and alloy steels. Alloying additives increase the strength and corrosion resistance of steel and reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes should not exceed twice the wall thickness.
Low Pressure Polyethylene (HDPE) is made of multilayer, non-toxic, deep-coloured polyethylene and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material
Other products from the series Swing and balance